Cable Management: F.A.S.T System
Introducing Cooper B-Line's F.A.S.T. TM Underfloor Cable Tray
System
Cooper B-Line's F.A.S.T. System is the most Foldable, Adjustable and Stackable
underfloor tray system on the market...and it's Tool-Less!
This new system requires no tools, has fewer parts, and is simpler to install
than any other system on the market today! And, to save time and installation
scheduling headaches, it can be installed before the raised floor is in place.
System Features & Benefits:
- Tool-Less assembly of supports - Reduces installation time/cost by eliminating
the time required to bolt/screw hardware together or bend tabs to assemble
supports.
- Tool-Less splicing/mounting of tray to supports - Reduces installation time/cost
by eliminating the time required to bolt/screw hardware together or bend tabs to
secure the tray.
- Stands are independent of raised floor which enable the system to be installed
before the raised floor. Simplifies the installation by reducing the amount of
coordination required between the electrical, communications and flooring
contractors.
- Tray - The tray in the system is wire mesh and comes in the following sizes:
Lengths - 24" and 48"
Depths - 2", 4" and 6"
Widths - 6", 12" and 20"
- Fitting - Flat fitting for turns reducing the installation time/cost by
eliminating the need to cut basket tray on the jobsite.
- Stands - The trays in the system are a patented design that enables them to be
Foldable, Adjustable (6" vertically) and Stackable. Pre-galvanized steel
construction. Available in the following sizes:
- Widths - 12" and 20"
Height Adjustment Range from the deck: 10-16:, 18"-24" and 25"-31"
- Accessories - Tool-less clips and supports that connect the tray and add
multiple levels.
Cantilever kits - Tool-less kits available in single and double tier.
Hold down clip - Spring steel fasteners that enable tray to be spliced and held
down on stand with no tools.
Static Stands - Supports tray in raised floors that are 12" high or lower.
 |
 |
 |
F.A.S.T. System can be installed independent of the floor system |
Stackable to create multiple tiers |
No tools required for assembly |
 |
 |
 |
Cantilever kit allows for multiple tiers without limiting access to lower level |
Cantilever foot secures vertical support to stand easily without tools |
Cantilever brackets are fully adjustable and require no tools to install. Slide bracket up/down the vertical support and lock tabs into position |
 |
|
 |
Vertical supports are marked in inch increments for easy alignment and have a hinged locking collar to securely set the stand height. |
|
Baskets can be laid on stands with a slight gap to allow for uneven wire basket cuts. Formed basket guides on stands act as a stop guide for the wire basket. |
F.A.S.T. Products Overview
Wire Basket Features:
- Rounded ends on all wires
- UL Classified (see technical data for details)
- Depths: 2", 4" & 6" nominal
- Lengths: 24", 48" & 118"
- Flat fitting for turns
- Wire diameter: 0.191" (4.9mm)
- Standard finishes: Zinc Plated & Pre-Galvanized - Consult
customer service for other available finishes.
Stands Features:
- No tools required for installation
- Formed top surface free of protrusions or sharp edges
- 6" height adjustment
- Inside and outside leg positioning
- Folded and boxed for ease in shipping
- Patent Pending
- Stand part number includes:
One (1) Stand
Two (2) Feet
Two (2) Adhesive Pads
Two (2) Hold Down Clips
- Standard finish: Pre-Galvanized
Cantilever Kits & Accessories Features:
- No tools required for installation
- Simple design for tiered applications
- Available in kits or individual parts
- Adjustable shelf height
- Formed top surface has no sharp edges
- Can be installed independent of raised floor
- Standard finish: Pre-Galvanized
Accessories:
Various clips, assemblies, clamps and other accessories are available for the
F.A.S.T. System.