Cable Management
  1U Brush Panel
1U x 19" Brush Strip Panel
     
  Twist and Lock Cable Management
Twist and lock cable management system provides a versatile system for vertical and horizontal cable management with the large diameter ensuring the correct bend radius on cables.
   
  • Arms and Ends. 10 Pack (TLCMS)
  • Divider Rings - 10 Pack (TLCMR)
     
  Enhanced Twist and Lock Ends
This addition to the Twist and Lock range offers greater versatility than the standard end fitting.
 
  • Enhanced Twist and Lock Ends. 10 Pack (TLCMEF)
     
  Twist and Lock Cable Management Panel
This 2U high panel incorporates up to 5 twist and lock arms to provide horizontal cabling across the rack. The large diameter arms ensure the correct bend radius on cables.
 
  • 2U Twist and lock Cable Management panel (TLCMFP)
     
  Cable Tray
Available in 22, 27 32, 39, 42, and 47U heights in both 75mm and 150mm wide versions.
 
  • ACTR (22-47) - 75mm wide.
  • ACTRW (22-47) - 150mm wide
  • Slotted for cable ties
  • Can be mounted directly to central extrusions
  • 75mm wide can be mounted to 800 wide adaptors to allow vertical management
  • Usually posistioned behind 19" panel mounts
  • 1.5mm zinc plated mild steel
     
  Cable Basket
Available in 22, 27 32, 39, 42, and 47U heights in both 150mm and 300mm wide versions.
 
  • ABS (22-47) 15-150mm wide
  • ABS (22-47) 30-300mm wide
  • Mesh Design for easy cable entry/exit
  • Can be posistioned behind 19" panel mounts
  • Usually mounted directly to central extrusions
  • Welded wire basket
  • Electroplated zinc finish
     
  Cable Tidies
Cable Tidy Ring Plastics - Large (CTL). Small (CTS)
     
  Cable Hoop
This new cable management solution provides a minimum cable area of 1550mm2 on a 600mm wide rack rising to 650mm2 on 800mm wide cabinets.
   
  • Cable Management Hoop (ACH6)
  • Fits 800mm wide cabinets (ACH8)
     
  Jumper Panel
Effective horizontal cable management remains a necessary element of any cabling system. Based on universal 19" mounting centres (IEC 297 Standard) the 1 and 2U high panels have welded cable support hoops.
   
  • 1U Jumper Panel (JRP1)
  • 2U Jumper Panel (JRP2)
     
  Support Bracket
This bracket has been designed specifically for supporting vertical cable trunking when fitted between bayed 800mm wide cabinets and also provides horizontal cable support between racks when used in conjunction with twist and lock arms.
   
  • 800 & 600 Cabinets (FCT68)
  • 2 x 600 Cabinets (FCT66)